|
|
All-in-one power showers that combine a mixing valve with a pump, in one complete unit.
For correct operation of NewTeam all-in-one power showers, both hot and cold water supplies to the shower unit must be gravity fed, from a cold water storage tank and a hot water storage cylinder of 112 litre capacity (25 gallons).
Electrical connections must be a local supply from a 13 amp ring main, fused at 3 amp.
Please note:
- Do not connect directly to mains water.
- Power showers are not suitable for combination boilers or combination cylinders.
The diagram shows the basic water connections required for typical power shower installations. | |
|
